INQUIRY

You are here :

☰ALL CATEGORIES

Shop

The longitudinal submerged arc welded pipe is made of steel plate as raw material, which is formed by a forming machine, and then double-sided submerged arc welding is carried out. Through this process, the LSAW pipe will have excellent ductility, toughness, uniformity, plasticity and good sealing performance.
EN10219 welded steel pipe is a round steel pipe that complies with European standards and its material is S235JR. This material has good plasticity and weldability, as well as good mechanical properties and corrosion resistance.
DIN 1629 seamless steel pipe has three main grades of St37.0, St44.0, St52.0. Generally, the DIN 1629 standard is not limited to the working pressure value, and the working temperature is limited to below 300 ℃.
This standard applies to seamless steel tubes for general structural and mechanical structures. The main production of steel pipe grade includes Gr 10, Gr 20, Gr 35, Gr 45, Q345, 15CrMo, and 12Cr1MoV.
ASTM A252 is the standard specification for nominal-wall cylindrical steel pipe piles, where the cylinder acts as a permanent load-bearing member or shell to form a cast-in-place concrete pile. The ASTM A252 specification has three grades: Grade 1, Grade 2, and Grade 3, of which Grade 2 and Grade 3 are commonly used materials.
A213 is a ferrite and austenitic alloy seamless steel pipe for boilers, superheaters and heat exchangers. Its products should comply with TSG D7002 pressure piping component type test rules.
ASTM A335 steel pipe may be hot finished or cold drawn and subjected to the following finishing heat treatment. The specification covers “chrome-molybdenum” seamless pipes with excellent corrosion resistance and high temperature tensile strength.
Grade S355 is a low carbon manganese-containing steel alloy. This medium-strength carbon steel has both good weldability and good impact resistance. Grade S355 steel is also well suited for sub-zero temperature applications.
A179 seamless cold drawn low carbon steel pipe is equivalent to China’s No. 10 high-quality low-carbon steel. A179 is suitable for cold-drawn high-quality low-carbon seamless steel pipes for heat exchangers and condensers.
ASTM A192 is the same as ASME SA-192 and is the standard specification covering seamless carbon steel boiler and superheater tubes of minimum wall thickness for high pressure service.
Shipbuilding steel plate refers to the carbon and alloy steel plate used in offshore and marine contructions, common grades are A, B, D, E, AH32/36/40, DH32/36/40, and EH32/36/40 which ranged from different strength.
Hot Rolled Steel A36 (ASTM A36) is the most commonly available grades of the hot-rolled steels which has good overall mechanical properties, is easily fabricated and may be formed hot or cold. Due to the hot roll process the surface on this steel will be rough when compared to cold rolled. ASTM A36 yield strength is also less than C1018.