INQUIRY

You are here :

☰ALL CATEGORIES

Shop

Silicon steel is an extremely low-carbon ferrosilicon alloy material with a silicon content of 0.5% to 4.5%. Silicon steel has the characteristics of high magnetic permeability, low coercivity, and large resistivity. According to different production processes, it can be divided into hot-rolled silicon steel and cold-rolled silicon steel.
Non-oriented electrical steel is mainly used as the iron core of large and medium-sized motors, generators, household motors and micro-motors, ballasts and small transformers. The main magnetic performance requirements of non-oriented electrical steel are low specific total loss and high magnetic polarization. The low specific total loss can save a lot of electric energy and extend the working time of the motor. High magnetic polarization means that the magnetization ability is strong, the excitation current of the iron core is reduced, and the specific total loss and iron loss are reduced.
The products are usually cold-rolled plates or strips with nominal thicknesses of 0.35 and 0.5mm, which are mainly used to manufacture motors and generators.
Non-oriented silicon steel ribbons are widely used in the manufacture of high-frequency magnetic components such as various telecommunications and meters, such as the iron cores of magnetic devices such as power transformers and pulse transformers. With the development of science and technology, the device is required to have high performance and small volume, so the frequency of the device is becoming higher and higher. The higher the working frequency of the iron core, the thinner the silicon steel plate is required, and the ordinary non-oriented silicon steel sheet cannot meet the requirements.
Non-oriented silicon steel is used in rotating equipment such as motors. It is divided into iron core and rotor. In order to be easily magnetized during the rotation process, electrical energy is converted into mechanical energy. Therefore, it is required to be easily magnetized at every angle in the rotation process, so the grain orientation distribution in the non-oriented silicon steel is required to be uniform.
Non-oriented electrical steel is a kind of ferrosilicon soft magnetic alloy with low carbon content, which is an indispensable material in electric power, electronic and military industry. With the development of high-speed and miniaturization of motors, the performance requirements of non-oriented silicon steel are put forward higher requirements, such as low iron loss and high magnetic induction strength at high frequency.
Non oriented electrical steel is a silicon iron soft magnetic alloy with very low carbon content, and is an indispensable and important material in power, electronics, and military industries. With the development of high-speed and miniaturization of motors, higher requirements have been put forward for the performance of non oriented silicon steel, such as low iron loss and high magnetic induction strength at high frequencies.
The demand for CRNGO steel in home appliances is driven by its efficiency in motor operation within air conditioners, refrigerators, etc. Preferred grades include 50W1300、50W1000、50W800、50W600、50W470、50W350、35W270、35W230、35W210, selected for their balance of performance and cost.
These applications require steel grades like 50W800、50W600、 50W470、50W350、50W300, chosen for their high magnetic efficiency and durability in demanding operational environments, optimizing energy savings and longevity.
High-grade CRNGO such as 50W350 is essential for large power generation units, while the wind power industry often opts for grades like 50W600, reflecting the specific needs of each energy sector.
High silicon silicon content of 2.8~4.8%, it is good magnetic, but more brittle, mainly used in the manufacture of transformer core, commonly known as transformer silicon steel sheet, commonly used in high silicon manufacturing large motor.
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in transformer (core) manufacturing industry. The most widely used oriented silicon steel is supplied in the form of a coil, and its surface is coated with an insulating layer to generate tensile stress in the base steel strip, thus further reducing the iron loss value. The cold-rolled strip has a smooth surface, good punching performance and high core filling factor.