INQUIRY

You are here :

☰ALL CATEGORIES

Shop

C28000 copper pipe is made from a copper-zinc alloy consisting of 60% copper and 40% Zinc. Having good corrosion resistance, mechanical properties and formability, it is widely used in construction, marine, industry and other fields.
C27000 brass has good mechanical properties and high strength and plasticity, can well withstand cold and hot pressure processing, and has a tendency to corrode and crack. Widely used in aerospace, electric power, petrochemical, shipbuilding, machinery, electronics, environmental protection and other industries.
C10200 copper coil is made from anly pure copper material known as oxygen free copper, with a purity of usually over 99.95%. Due to itsly low oxygen content, C10200 copper coil has excellent electrical and thermal conductivity, as well as good welding and processability.
C12000 copper plate is made from a high-purity electrolytic copper, also known as ETP copper (Electrolytic Tough Pitch Copper). Its main component is copper, with a content of more than 99.9%, and it also contains small amounts of impurity elements such as oxygen, iron and sulfur.
C11000 copper plate is made from an alloy based on copper and hasly high purity, usually containing no less than 99.9% copper. This alloy has excellent electrical and thermal conductivity properties while also providing good corrosion resistance and mechanical strength.
C10100 copper plate is made from anly pure copper alloy with a copper content of more than 99.99%, giving it excellent electrical and thermal conductivity. This high-purity copper is widely used in the electrical and electronic industries and other areas where high conductivity and good processability are required.
Steel trench sheets can be supplied in a variety of profiles and length and steel grades. Overlapping trench sheets are without interlocks. While interlocking trench sheeting is like other kind of sheet piles, connected with interlocks. Since trench sections are also produced from cold rolling technology, so any sections can be produced, like RC sections etc. The Trench profile sheet pile is a light weight trench sheet with simple overlap connection. Designed for fast re-uses with low strength requirements, such as pipeline installation.
Hot rolled steel sheet pile forms its shape from the molten iron. The usual finish is mill finish, which is light scale on small stuff and heavy scale on thick stuff. With interlocks at both ends, more sections form a continuous sheet piling wall, which is a rigid barrier for earth and water, resisting the lateral pressures. Sheet pile wall provide excellent resistances to bending forces and structural strength to deep foundation.Wide range of sections forming several series with various geometrical characteristics, enabling the choice of technically and economically optimized sections for each specific project.
Stainless steel I-beams are made of 201(1Cr17Ni5Mn6N), 202(2 Cr13Mn9Ni4), 301(1 Cr17Ni7), 303(Y1Cr18Ni9), 304(OCr18Ni9), 304L (03 Cr19Ni10), 316(0 Cr17Ni12Mo2), 316L(00 Cr17Ni14Mo2), 321 (1 Cr18Ni9Ti), 420( 2cr13), 310S(0 Cr25Ni20), etc. The chemical composition of stainless steel I-beams belongs to general structural rolled steel series, the main test indexes were C, Mn, P and S. According to different grades, the content varies, the approximate range is C<0.08%, Mn: 2.0, P<0.035%, S<0.03%. Materials are widely used in hardware products, medical machinery, food machinery, ships, automobiles, doors and windows, furniture, large machinery, etc.
The Omega type sheet pile has a hat shape cross sections with relatively thin but larger sectional areas. This allows efficient implementation of pile driving work, which can secure higher structural reliability and more economically. The interlocks are at the outermost part of L/S type sheet pile, the neutral axis of each pile is same with the whole sheet piling wall. This means that the L/S type sheet pile can display its structural performances in different ground conditions. Sometimes, China sheet piles can be handled and installed with small hammer or rig or driver. The pan type sheet pile is a structural steel product that incorporate the sheet piling manufacturing technology and application technology relating to construction works.
Z type hot rolled steel sheet piles normally refer to AZ sheet pile, PZ sheet pile, PZC sheet pile OZ sheet pile etc. Because the competition of Z profiles are not so heavy as U profiles, Z profiles prices are normally higher than U profiles, although the rolling costs is roughly the same. Any sections with Larssen locks can be called Larssen steel sheet pile. Larrsen was the name of man who invented Larssen interlocks. AZ Larssen sheet piling can be supplied in single piles, crimpled double piles. This is the delivery form of Larssen sheet pile. We can also sell bent piles, corner piles, junction piles for Larssen steel sheet piling.
Cold rolled or cold formed U type sheet piles are most widely used in Asia,like in China, Philippines, Indonesia, Malaysia, Singapore, Vietnam etc.In Middle east, we have shipped our cold rolled profiles to almost every country: Iraq, Iran, Jordan, UAE, Saudi Arabia, Bahrain, Kuwait, Pakistan etc. In Australia,Africa,North and South America,we also have numerous clients and projects. Sheet pile can be supplied in single pile, double piles or even triple piles. Steel sheet pile contractors choose U profiles mainly because the interlocks are located on the neutral axis. In theory, our sheet pile factory can produce any size.