INQUIRY

You are here :

☰ALL CATEGORIES

Galvanized /Galvalume Steel Series

AZ stands for aluminum-zinc alloy, which is the material of the steel coating. AZ50 refers to the total weight of both sides of the aluminum-zinc alloy coating in the three-point test in ASTM a972 standard is 0.50 ounces/square foot, which is equivalent to 150 grams/square meter.
AZ55 is the standard for galvanized steel sheets and coils used in a variety of applications, including roofing and siding. The AZ55 name refers to the thickness of the coating on the coil, which is between 0.375 and 1.5mm (0.015 and 0.059 inches).
AZ150 galvalume steel coil has a coating thickness of 18 microns on one side and 36 microns on both sides. The coating alloy of the steel consists of 55% aluminium, 43.4% zinc and 1.6% silica. This coating of steel acts as a passive barrier to general corrosion. It also helps protect steel from trimmed edges and scratches.
Galvanized steel coil, immersing the thin steel plate in the molten zinc bath, and adhering a layer of zinc thin steel plate on the surface. It is mainly produced by the continuous galvanizing process, that is, the coiled steel plate is continuously immersed in the zinc-melted plating tank to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also made by the hot-dip method, but it is heated to about 500 °C immediately after exiting the tank to form an alloy film of zinc and iron. This galvanized steel coil has good paint adhesion and weldability.
When steel components are used to make more complex finished products, they can be galvanized before the product is assembled. This is called pre-galvanizing, or “pre-galvanizing”. It may also be referred to as “in-line”, “continuous” or “rolled” galvanizing.
The Z150 in the DX51D Z150 galvanized steel sheet is the actual coating name. The manufacturer describes the DX51D Z150 material as a mild steel galvanized layer for steel products. Specifically, DX51D is a steel grade characterized by its cold-formed bending and profiling qualities.
DX52D is a hot-dip galvanized sheet material. In order to improve the corrosion resistance of the steel sheet, the general steel sheet is galvanized. Galvanized steel pipe is divided into hot dip galvanized and electric galvanized two, hot dip galvanized galvanized layer is thick, electric galvanized low cost, the surface is not very smooth.
DX53D galvanized sheet is a commonly used construction steel with a wide range of material properties and applications, excellent corrosion resistance and good processing performance. In the construction industry, this material is widely used in roofs, walls, floors and other parts that need to resist atmospheric corrosion.
Galvanized steel sheets are covered with a zinc coating to provide corrosion resistance. G40 is a galvanized layer name or A653 standard specification specified in the hot-dip coating process galvanized (galvanized) or zinc-iron alloy (galvanized) steel sheet requirements.
G60 is the coating grade of steel sheet after continuous hot dip plating process. G represents the “galvanized” or galvanized layer of the product. The number 60 refers to the thickness of the zinc around the steel sheet or the thickness of the entire double-sided coating.
G90 refers to the coating type and coating weight on the steel plate. “G” means that the coating is galvanized. Meanwhile, the number “90” represents the weight of zinc on the steel. G90 galvanized steel is hot-dip galvanized cold-rolled steel sheet to improve durability.
When steel components are used to make more complex finished products, they can be galvanized before the product is assembled. This is called pre-galvanizing, or “pre-galvanizing”. It may also be referred to as “in-line”, “continuous” or “rolled” galvanizing.